Dryer Does Nothing when You turn it on?
Answer 1: Plug something else into the same outlet. If it works, you know you have power to the dryer. If it doesn’t work, you’ll need to check for any blown fuses or tripped circuit breakers. Electric dryers should have the wiring checked at the terminal block to make sure that the connection is good, or to verify that the connection is burnt out.
If the power is there, you will want to check the door switch, thermal fuse, thermostats, and start switch to see if one of these is faulty. Make sure that the control settings are appropriate, and that any buttons are fully depressed. Make sure that the start button has been fully pushed down or turned far enough to activate the dryer.
The door or lid switch performs two main functions. When the dryer door is open, it keeps the dryer from starting, and turns on the light. If the door switch is faulty, your dryer won’t work, and you’ll need to replace the switch. The door switch is located inside of your dryer’s main housing right by the door frame. You’ll probably need to access this switch through the top or front of your dryer.
There may also be a problem with the start switch. Test and replace if it is faulty.
Many dryers use what’s called a thermal fuse. This is often mounted within the exhaust duct in the back panel. This fuse is about an inch long, and is usually found within a white plastic housing. Your dryer will not operate if this fuse is defective. You can test this fuse, and if faulty, replace it.
Most fuses have a thin wire that conducts electricity. When fuses blow, it means the wire is broken, they have no continuity and no power will flow through it. When this happens to the thermal fuse, your dryer either doesn’t work at all, or it stops heating. Give your vent and heating system a visual check before you replace this fuse.
Call ApplianceQuest for all your Appliance Needs
Call Today 352-270-3238